Service Life Of Batteries; Important Note - Vectron POS MobilePro User Manual

Table of Contents

Advertisement

56
6.4

Service life of batteries

The Vectron B30 battery is a high-quality, rechargeable Lithium-Ion-
battery. To reach its maximum capacity they should be discharged
completely three to four times and then charged again.
Symptoms which indicate an exhaustion of the battery capacity:
• The battery must be charged in ever shorter intervals.
• The Vectron POS MobilePro suddenly switches off and can only
be used with a newly charged battery. The error message „Batte-
ry empty" is no longer displayed.
• The Vectron POS MobilePro does not react to switch on.

Important note:

Exhausted or damaged batteries cannot be repaired
but need to be exchanged and disposed of properly!
Attention!
Tips for a long service life of the batteries:
• If possible use the batteries until the Vectron POS MobilePro fa-
des in the message „Battery empty" or - when having confi gured
the capacity progress bar - the bar turns red.
• Always charge the discharged batteries completely. This status
is indicated by permanently illuminated control lamps.
• Batteries that are not used for a longer period (approx. 2 - 3
months), should be charged to max. 30 %. For this purpose the
discharged Vectron B30 must be charged for approx. 40 minutes.
Afterwards do not store the battery in the charging station.
Vectron POS MobilePro

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the POS MobilePro and is the answer not in the manual?

Table of Contents