COMPACT WATERSIDE FAN COIL SPECIFICATION CASINGS COILS The casings shall consist of durable 1.2mm (18 gauge) All heat exchangers shall be tested at a minimum of 25 galvanised steel reinforced to form a rigid monoque bar pressure. The coils shall be manufactured using structure.
MOUNTING / CONNECTIONS Thank you for choosing the Lennox Quantum Compact PIPEWORK CONNECTIONS Fan Coil Unit. Please read the following information 1. Water flow and return connection carefully prior to installation. These instructions should Plain pipe connection tails are all to BS 2871, Part 1: be kept in a safe place for future reference.
ELECTRICAL CONNECTIONS / CONTROLS ELECTRICAL CONNECTIONS 1. Fan Speed Out of 6 speeds available, SL (Super Low), EL(Extra Low), ISOLATE ELECTRICAL SUPPLY BEFORE L(Low), ML(Med/Low), M(Med), and H(High), the fan ATTEMPTING SERVICE WORK. speed selector switch will be wired for three speeds. Speed adjustment and fine tuning is achieved by following the instructions indicated on the label that is A 230V, 50Hz, single phase supply is required.
To achieve the design speed use a combination of main tappings on the transformer and switch positions on the outside of the control box. ON +5v +10v 3 spd MAIN TAPPINGS SWITCH POSITIONS OUTPUT LC22 3 spd + 10v + 5v VOLTS SWITCH POSITIONS...
PERIODIC MAINTENANCE PERIODIC MAINTENANCE PROCEDURE 6. Fan Motor and Fan A regular check on the fan/motor assembly is The following routine maintenance operations should be advisable to ascertain if any overheating of the motor is occurring and that the fan impeller is free running carried out twice a year or at such shorter intervals as and has not sustained any damage.