Using The Pen - Xplore iX104C5 User Handbook Manual

Using the pen

For more information about
Dual Mode tablet input
methods, see Appendix F,
"Configuring Dual Mode
Tablet Digitizer Input
Methods."
iX104C5 User's Handbook
You can use the pen to select items and to navigate through programs.
All iX104C5 Models:
You can use any of the following input methods:
Auto-Sense mode: Use either the multi-function pen or your
finger interchangeably. The computer distinguishes between
the two input modes and automatically adjusts accordingly.
This is the tablet's default state.
Active mode: Use only the special multi-function pen
provided with the computer.
Touch mode: Use your finger or another similar pointing
device.
For more information, see "Selecting Auto-Sense, Active, or
Touch mode" on page 38.
WARNING
Do not use items such as a ball point pen or a screwdriver that can
damage the tablet. Damage caused by using an item not provided with
the tablet is not covered by the tablet warranty.
Note: During the first use of the tablet, or if the action you are
trying to perform does not occur when you use the pen or your
finger to touch the screen, calibrate the digitizer as described in
"Calibrating the digitizer" on page 85.
Chapter 2. Using the Tablet
Using the pen
37