Huawei EchoLife HS8245W Installation Manual page 12

Installing HS8245W
Quick Installation HS8245W
Step 1:
Use an optical fiber to connect the optical port on the ONT and the optical port on the wall.
1.The type of the optical connector connected to the optical port in the all is determined by practical conditions.
2.To ensure normal use of fibers, make sure that the fiber bend radius is larger than 30 mm.
Step 2:
Use a network cable to connect the LAN port to a PC or the Ethernet port on the IP STB.
Step 3:
Use a phone line to connect the TEL port to a phone or fax machine.
Step 4:
Use a power adapter to connect the POWER port to the power socket.
The preceding figure connects the power adapter as an example. When connecting the backup battery unit,
please see the usage guide to the backup battery for details
Step 5:
Use a USB data cable to connect the USB port to the USB storage device.
Step 6:
Press the ON/OFF power switch.
Step 7:
Press the WLAN switch to enable the Wi-Fi access function. By default, this function is enabled.
Step 8:
Press the WPS switch to enable the WPS encryption function.
Configuring Wi-Fi Parameters
Step 1:
Choose the WLAN tab and choose 2.4G Basic Network Settings. (If you want to configure 5G Wi-Fi,
choose 5G Basic Network Settings.)
Step 2:
In the pane, select the Enable WLAN option box. In the dialog box that is displayed, set the basic
Wi-Fi parameters, including the SSID, authentication mode, and encryption mode.
-SSID: See the nameplate on the device. SSID indicates the name of a wireless network searched
by the Wi-Fi terminal.
-WPA PreSharedKey: See the nameplate on the device. WPA PreSharedKey indicates the
authentication password for the Wi-Fi terminal to access a wireless network.
Step 3:
Click Apply.
.
11