M
ANUAL
2
. . Installation
2.1
Safety instructions
2.2
Delivery check
2.3
General working method
Version: 4.0 (19-12-2007)
d
Danger:
Installation works on the unit may be performed by
qualified technical staff only.
w
Warning:
Before opening the unit, follow the safety instruc-
tions in section 1.4.
•
Check the unit and its packaging for correct delivery.
Immediately report to the supplier any damage caused in
transit.
•
Check whether all parts are included.
•
Biddle recommends following the order of working
described in this chapter for performing the installation
works.
•
Some parts of this section are applicable only to certain
models of the fan coil unit. Where this is the case, it will
be indicated so. If no specific model is referred to, the
description will apply to all models.
n
Note:
Make sure you perform all installation operations that are
required for your unit.
Check the type plate. Refer to section 1.3.3 'Available
models, and type references' if you are not sure about the
model or type of your unit.
I
NSTALLATION
11