Specifications - Makita DHP481 Instruction Manual

ENGLISH (Original instructions)
1-1. Red indicator
1-2. Button
1-3. Battery cartridge
2-1. Star marking
3-1. Indicator lamps
3-2. Check button
4-1. LED display
5-1. Switch trigger
6-1. Lamp
7-1. Reversing switch lever

SPECIFICATIONS

Capacities
-1
No load speed (min
Blows per minute
• Due to our continuing program of research and development, the specifications herein are subject to change without notice.
• Specifications and battery cartridge may differ from country to country.
• Weight, with battery cartridge, according to EPTA-Procedure 01/2003
Intended use
The tool is intended for impact drilling in brick, concrete
and stone. It is also suitable for screw driving and
drilling without impact in wood, metal, ceramic and
plastic.
Noise
The typical A-weighted
according to EN60745:
Sound pressure level (L
Sound power level (L
Uncertainty (K) : 3 dB (A)
Wear ear protection
Vibration
The vibration total
determined according to EN60745:
Work mode: impact drilling into concrete
Vibration emission (a
Uncertainty (K) : 1.5 m/s
Explanation of general view
8-1. Speed change lever
9-1. Action mode changing ring
9-2. Arrow
10-1. Adjusting ring
10-2. Graduation
10-3. Arrow
11-1. Protrusion
11-2. Arm
11-3. Groove
11-4. Grip pole
Model
Drilling into concrete
Drilling into steel
Drilling into wood
Fastening wood screw
Fastening machine screw
High (2)
)
Low (1)
High (2)
Low (1)
Overall length
Net weight
Rated voltage
noise level determined
) : 85 dB (A)
pA
) : 96 dB (A)
WA
value (tri-axial vector
2
) : 6.5 m/s
h,ID
2
ENE079-1
Work mode: drilling into metal
Vibration emission (a
Uncertainty (K) : 1.5 m/s
The declared vibration emission value has been
•
measured in accordance with the standard test
ENG905-1
method and may be used for comparing one tool
with another.
The declared vibration emission value may also be
•
used in a preliminary assessment of exposure.
WARNING:
The vibration emission during actual use of the
•
power tool can differ from the declared emission
value depending on the ways in which the tool is
used.
ENG900-1
Be sure to identify safety measures to protect the
•
sum) operator that are based on an estimation of
exposure in the actual conditions of use (taking
account of all parts of the operating cycle such as
the times when the tool is switched off and when it
is running idle in addition to the trigger time).
4
11-5. Side grip
12-1. Sleeve
13-1. Bit holder
13-2. Bit
14-1. Depth rod
14-2. Clamp screw
15-1. Groove
15-2. Hook
15-3. Screw
17-1. Blow-out bulb
DHP481
16 mm
13 mm
76 mm
10 mm x 90 mm
6 mm
0 - 2,100
0 - 550
0 - 31,500
0 - 8,250
205 mm
2.7 kg
D.C. 18 V
2
) : 2.5 m/s or less
h,D
2
ENG901-1