Related Manuals for Makita DHP481RMJ
Summary of Contents for Makita DHP481RMJ
- Page 1 INSTRUCTION MANUAL Cordless Hammer Driver Drill DHP481 014694 IMPORTANT: Read Before Using.
-
Page 2: Specifications
ENGLISH (Original instructions) SPECIFICATIONS Model DHP481 Drilling into concrete 16 mm Drilling into steel 13 mm Capacities Drilling into wood 76 mm Fastening wood screw 10 mm x 90 mm Fastening machine screw 6 mm High (2) 0 - 2,100 No load speed (min Low (1) 0 - 550... - Page 3 Do not expose power tools to rain or wet Power tool use and care conditions. Water entering a power tool will 17. Do not force the power tool. Use the correct increase the risk of electric shock. power tool for your application. The correct Do not abuse the cord.
- Page 4 ENC007-8 Service 28. Have your power tool serviced by a qualified IMPORTANT SAFETY repair person using only identical INSTRUCTIONS replacement parts. This will ensure that the safety of the power tool is maintained. FOR BATTERY CARTRIDGE 29. Follow instruction lubricating changing accessories.
-
Page 5: Functional Description
Battery protection system FUNCTIONAL DESCRIPTION (Lithium-ion battery with star marking) CAUTION: 1. Star marking Always be sure that the tool is switched off and the • battery cartridge is removed before adjusting or checking function on the tool. Installing or removing battery cartridge 1. -
Page 6: Switch Action
The lamp turns off cool down the tool fully. If the condition does not in one minute. change, have the tool repaired by a Makita local Use a dry cloth to wipe the dirt off the lens of lamp. •... -
Page 7: Adjusting The Fastening Torque
Speed change Adjusting the fastening torque (screwdriver mode " ") CAUTION: Always set the speed change lever fully to the 1. Adjusting ring • 2. Graduation correct position. If you operate the tool with the 3. Arrow speed change lever positioned halfway between the "1"... -
Page 8: Operation
Installing or removing driver bit or drill bit Hook 1. Sleeve 1. Groove 2. Hook 3. Screw 014698 014700 Turn the sleeve counterclockwise to open the chuck The hook is convenient for temporarily hanging the tool. jaws. Place the bit in the chuck as far as it will go. Turn This can be installed on either side of the tool. -
Page 9: Drilling Operation
• any other maintenance or adjustment should be the diameter of the screw. It makes driving easier performed by Makita Authorized Service Centers, and prevents splitting of the workpiece. always using Makita replacement parts. If the tool is operated continuously until the battery •... -
Page 10: Optional Accessories
Only use accessory or attachment for its stated purpose. If you need any assistance for more details regarding these accessories, ask your local Makita Service Center. Drill bits • Hammer drill bits • Screw bits •... - Page 12 Makita Corporation www.makita.com 885341-3...