Installing The Built-In Electrode Arm; Installing Power Adapter - OHAUS STARTER 2100 Instruction Manual

pH electrode protection solution
pH sensor protect bottle(10 in bag)
Electrode holder attached (2100)
Electrode holder stand alone (3100/3100C)
2.2

Installing the built-in electrode arm

Install the built-in electrode arm on the left or right sight of the STARTER 2100 meter.

Remove the arm hole rubber cover from the meter, Insert the metal stick into the hole and
screw to fasten it.

Install the upper electrode arm upon the metal stick from above; adjust it to a moderate
height.
2.3

Installing power adapter

Choose the right adapter clip, insert into the power adapter slot. Ohaus balance power supply is
also 12V which could also be used for the pH meter.
6
30059256
30064800
30058732
30058733