Alfa Romeo 4C Owner's Handbook Manual page 139

To position again the soft top on the car,
proceed as follows:
❒ open the doors;
❒ take the soft top from the luggage
compartment and place it in the centre
line; the front side can be recognised by
the presence of the safety visor fig. 110;
❒ unroll the soft top inserting it under
the spoiler and making sure that it is
correctly positioned;
❒ turn the rail upwards and insert in the
side centring pins of the soft top in the
respective housings
fig. 113 on the car being careful to insert
the front pin and the rear pin;
113
❒ press the side devices 2 inwards
fig. 114 and turn the rail downwards;
❒ leave the handles and complete the
rail rotation pressing it until you hear the
closing click of the lock;
❒ check that the devices 2 are
completely closed fig. 115;
❒ proceed in the same way for the other
side of the soft top;
114
A0L0203
115
❒ position the two central devices
1 fig. 110 in the suitable housing inside the
car and rotate them by ¼ turn clockwise
to lock them. Check the correct insertion of
the pins into their seats and make sure the
grab ring is in horizontal position.
The fixing is carried out correctly and the
soft top is ensured only when the ring is
located in a horizontal position
(not vertical, or at 45°).
IMPORTANT NOTES
❒ It is advisable to install the soft top
after parking the car.
The closed top effectively protects the
car from rain and from theft.
A0L0220
A0L0221
137