❒ take the white funnel 4 fig. 93 for
topping up the windscreen washer
fluid/fuel and its extension pipe from the
servicing kit in the boot;
❒ take out the plug 2 fig. 91 with the
fluid control pipe through the bonnet
opening on the grille;
❒ introduce the funnel 4 fig. 93 and its
extension pipe in the reservoir neck and
top up;
❒ after topping up, remove the funnel 4
with the extension pipe;
❒ refit the plug 2 with the dipstick;
❒ reposition the bonnet grille and
tighten the 4 self-tapping screws 1.
93
110
BRAKE FLUID
123) 124)
18) 19)
To check the brake fluid level, proceed as
follows:
❒ undo the 2 self-tapping screws
5 fig. 94 and remove the protective
panel;
❒ check that the fluid is at the max.
level;
❒ after checking, reposition the
protective panel and tighten the 2 self-
tapping screws 5.
94
If the fluid level in the reservoir is not
A0L0148
sufficient, proceed as follows:
❒ take the black funnel for topping up
the brake fluid and its extension pipe
from the servicing kit in the luggage
compartment;
❒ undo the cap of the vessel and
introduce the funnel 6 fig. 95 with the
extension tube into the mouth of the
vessel;
❒ after topping up, remove the funnel 6
with the extension pipe;
❒ tighten the reservoir plug;
❒ reposition the protective panel and
tighten the 2 self-tapping screws 5.
WARNING Be very careful while
removing the plug from the opening to
prevent the plug from falling inside the
vehicle body.
A0L0149
95
A0L0160