Night Light; Sequence View - Samsung BrightVIEW User Manual

Voice activated (VOX)
Select to monitor significant sound with reduced ambient noise.
The screen goes off in "VOX" mode if there is no significant sound
louder than a certain level about 30 seconds. Meanwhile, the monitor
screen turns on as soon as detecting sound around the camera. In
"VOX" mode, you can set the sensitivity.
• Low Sound Level Detection : Sets to higher sensitivity.
• High Sound Level Detection : Sets to lower sensitivity.
Remark:VOX on, and once VOX trigger, the Bluetooth will alert and shake for Dozens of
seconds. You can stop the alert by press the Bluetooth button at the side of Bluetooth.
Once the wristband go beyond of the limit distant of Bluetooth, it will alert for several
seconds, then you can stop alert by pressing the Bluetooth button.
Multi camera mode
Press [ / ] switch the split mode.
According to the paired camera, screen split mode is different. When
two cameras are paired, it displays as 2-split mode.
When there are more than 2 cameras are paired, it displays as 4 split
mode.
Up to 4 cameras can be paired.
Out of Range
If the monitor is outside of transmission range with the paired
camera, the "Out of Range" message appears with warning beeps
at regular intervals.
Two-way talk
Press the [ ] icon while talking.
SEW-3057W.indd 7
Sound level
The louder the sound around the camera, the more LEDs turn on.

Night Light

Touch the [
deactivate the night light on the camera.
Remote PTZ and Zoom
You can remotely control the camera to pan, tilt and digital zoom.
Use [ ] icons on the wireless monitor to control the camera.
Use [

Sequence View

SEW-3036W
Press the "Sequence View"button, it switches to cam1 viewing.After
10 seconds, it automatically switches to cam2 for another 10 second.
Util largest cam number is viewed for 10 seconds, then it loops back
to view cam1 again.
] button on the camera to remotely activate or
] icon to zoom in and out.
[Camera]
English · 7
2016-12-23 11:48:51