Multi Camera Mode; Night Light - Samsung SEW-3043W User Manual

Voice activated (Vox)
Select to monitor significant sound with reduced ambient noise.
The screen goes off in "Vox" mode if there is no significant sound
louder than a certain level about 30 seconds. Meanwhile, the monitor
screen turns on as soon as detecting sound around the camera. In
"Vox" mode, you can set the sensitivity.
• Low Sound Level Detection : Sets to higher sensitivity.
• High Sound Level Detection : Sets to lower sensitivity.

Multi camera mode

Press [ / ] switch the split mode.
According to the paired camera, screen split mode is different. When
two cameras are paired, it displays as 2-split mode.
When there are more than 2 cameras are paired, it displays as 4 split
mode.
Up to 4 cameras can be paired.
out of Range
If the camera and monitor are not paired or if the monitor is outside
of transmission range with the paired camera, the "out of Range"
message appears with warning beeps at regular intervals.
Two-way talk
Press the [ ] icon while talking.
sound level
The louder the sound around the camera, the more LEDs turn on.
Portable monitoring
Slide the belt clip upwards to use the integrated belt clip on the
monitor. When not in use, please push the clip back to its original
position.

Night Light

Press the [
deactivate the night light on the camera.
SEW-3036W
Remote PTZ and Zoom
You can remotely control the camera to pan, tilt and digital zoom.
Use [
Use [
] button on the camera to remotely activate or
] icons on the wireless monitor to control the camera.
] icon to zoom in and out.
DC IN 6V
[Camera]
English · 7