Mail Server Configuration; Message Configuration; Sending A Test Message - Aruba 501 Configuration And Administration Manual

Mail server configuration

Mail server address
Specify the IP address or hostname of the SMTP server on the network.
Mail server security
Specify whether to use SMTP over SSL (TLSv1) or no security (Open) for authentication with the mail server. The
default is Open.
Mail server port
Configure the TCP port number for SMTP. The range is a valid port number from 0 to 65535. The default is 25,
which is the standard port for SMTP.
Username
The username and password fields display only when the Mail server security setting is TLSv1. Specify the
username to use for authentication with the mail server. The username can be from 1 to 64 characters long and
can include any printable characters.
Password
Specify the password associated with the username configured in the previous field. The password can be 1 to 64
characters long and can include any printable characters.

Message configuration

To address 1, 2, 3
Configure up to three email addresses to which alert messages are sent. Email addresses must be in valid
format, for example abc@def.com. By default, no addresses are configured.
Email subject
Specify the text to be displayed in the subject line of the email alert message. The subject can contain up to 255
alphanumeric characters. The default subject is "Log message from WCB".

Sending a test message

To validate the configured email server credentials, click Test Mail.
58 Aruba 501 802.11ac Wireless Client Bridge Configuration and Administration Guide