Quick Reference Table - Supermicro X11DDW-L/NT User Manual

X11DDW-L/NT User's Manual

Quick Reference Table

Jumper Description
JBT1 Clear CMOS
JPG1 VGA Enable
JPL1 LAN1/LAN2 Enable
JPME1 ME Recovery
JPME2 Manufacturing (ME) Mode Select
JVRM1 VRM SMB Clock (to BMC or PCH)
JVRM2 VRM SMB Data (to BMC or PCH)
JWD1 Watch Dog Timer Enable
Connector
Battery (BT1)
FAN1~6
IPMI_LAN
JAOM
JD1
JF1
JIPMB1
JL1
JM2_1
JNVI C1/JNVI C2
2 2
JPI C1
2
JPWR1/JPWR2
JPWR3
JRK1
JSDCARD1
JSTBY1
JTPM1
JUIDB1
LAN1/LAN2
P1_NVME0/P1_NVME1 (-NT)
P2_NVME0/P2_NVME1 (-NT)
(I-)SATA0~3, 4~7
(S-)SATA0~3
(S-)SATA4/S-SATA5
SXB1
Note: Table is continued on the next page.
Description
Onboard CMOS battery
System cooling fan headers
Dedicated IPMI LAN port
PCI-E 3.0 x16 SAS3 AOM controller slot
Power LED/Speaker header (Pins 1-3: Power LED, Pins 4-7: Speaker)
Front control panel header
4-pin external BMC I C header (for an IPMI card)
2
Chassis intrusion header
M.2 slot supported by PCH
NVMe I C headers
2
Power Supply SMBbus I C header
2
12V 8-pin power supply connectors
24-pin ATX main power supply connector
RAID Key for onboard SATA devices
Micro SD Card slot
Standby power header
Trusted Platform Module (TPM)/Port 80 connector
Unit Identifier (UID) switch
Gigabit LAN (GLAN) Ethernet ports on the back panel
NVM Express PCI-E 3.0 x4 ports (from CPU1)
NVM Express PCI-E 3.0 x4 ports (from CPU2)
I- SATA 3.0 connectors supported by the Intel PCH
S-SATA 3.0 connectors supported by the Intel SCU
S-SATA connectors with built-in power pins and support of Supermicro SuperDOM (Disk-on
Module) devices
PCI-E 3.0 (x16 + x16) Left Riser Card slot supported by CPU1 and CPU2
12
Default Setting
Open (Normal)
Pins 1-2 (Enabled)
Pins 1-2 (Enabled)
Pins 1-2 (Normal)
Pins 1-2 (Normal)
Pins 1-2 (BMC, Normal)
Pins 1-2 (BMC, Normal)
Pins 1-2 (Normal)