Supermicro X11DDW-L/NT User Manual page 15

Peripheral Devices
•
Two (2) USB 3.0 ports on the rear I/O panel (USB 0/1)
•
Two (2) USB 3.0 ports on the rear I/O panel (USB 2/3)
•
Two (2) USB 3.0 front accessible header (USB 4/5)
BIOS
•
256MB Aten BIOS
•
ACPI 3.0 or later, SPI dual/quad speed support, and SMBIOS 2.7 or later
Power Management
•
ACPI power management
•
Power button override mechanism
•
Wake-On-LAN
•
Power-on mode for AC power recovery
•
Intel® Intelligent Power Node Manager 3.0 (available when the Supermicro Power Manager [SPM] is installed and a
special power supply is used. See the note on page 20.)
•
Management Engine (ME)
System Health Monitoring
•
Onboard voltage monitoring for +1.8V, +3.3V, +5V, +/-12V, +3.3V standby, +5V standby, VBAT, HT, memory, PCH
temperature, system temperature, and memory temperature
•
CPU 5-phase switching voltage regulator
•
CPU thermal trip support
•
Status monitor for speed control
•
Status monitor for on/off control
•
CPU Thermal Design Power (TDP) support of up to 145W (See Note 1 on next page.)
Fan Control
•
Five 4-pin fan headers
•
Fan status monitoring via IPMI connections
•
Low-noise fan speed control
System Management
•
Trusted Platform Module (TPM) support
•
PECI (Platform Environment Control Interface) 2.0 support
•
Power supply monitoring
•
SuperDoctor® 5, Watch Dog, Non-maskable interrupt (NMI), RoHS
•
Chassis intrusion detection
LED Indicators
•
CPU/Overheating
•
Power/Suspend-state indicator
•
Fan failure
•
UID/remote UID
•
HDD activity
•
LAN activity.
Note: The table above is continued on the next page.
Motherboard Features
15
Chapter 1: Introduction