Supermicro X11DDW-L/NT User Manual page 126

X11DDW-L/NT User's Manual
The file system supported by the recovery block is FAT (including FAT12, FAT16, and FAT32)
which is installed on a bootable or non-bootable USB-attached device. However, the BIOS
might need several minutes to locate the SUPER.ROM file if the media size becomes too
large due to the huge volumes of folders and files stored in the device.
To perform UEFI BIOS recovery using a USB-attached device, follow the instructions below.
1. Using a different machine, copy the "Super.ROM" binary image file into the Root "\"
directory of a USB device or a writable CD/DVD.
Note: If you cannot locate the "Super.ROM" file in your drive disk, visit our website at
www.supermicro.com
into a USB flash device and rename it "Super.ROM" for the BIOS recovery use.
2. Insert the USB device that contains the new BIOS image ("Super.ROM") into your USB
drive and reset the system when the following screen appears.
to download the BIOS package. Extract the BIOS binary image
126