Supermicro X11DDW-L/NT User Manual page 59

Management Engine (ME) Recovery
Use jumper JPME1 to select ME Firmware Recovery mode, which will limit resource
allocation for essential system operation only in order to maintain normal power operation
and management. In the single operation mode, online upgrade will be available via Recovery
mode. See the table below for jumper settings.
Manufacturing Mode
Close JPME2 to bypass SPI flash security and force the system to use the Manufacturing
Mode, which will allow you to flash the system firmware from a host server to modify system
settings. See the table below for jumper settings.
JRK1
JL1
JNVI2C2
P2 DIMM
FAN6 FAN5
ME Recovery Mode
Jumper Settings
Jumper Setting Definition
Pins 1-2 Normal
Pins 2-3 ME Recovery
Manufacturing Mode Select
Jumper Settings
Jumper Setting Definition
Pins 1-2 Normal (Default)
Pins 2-3 Manufacturing Mode
LE1
1 2
JUIDB1 C
A
USB2/3
(3.0)
LAN2 LAN1
IPMI_LAN
USB0/1(3.0)
JM2_1
LE3
C621
BMC
S-SATA 0~3 I-SATA 0~3 I-SATA 4~7 JBT1
S-SGPIO2
SRW1
BIOS LICENSE
MAC CODE BAR CODE
JSDCARD1
BT1
X11DDW-L PWRRST PS UID NIC NIC HDD PWR X NMI
ON FAIL LED 2 1 LED LED
REV:1.02
DESIGNED IN USA
P1 DIMM
P2 DIMM
FAN4 FAN3
59
Chapter 2: Installation
1. ME Recovery
VGA
2. Manufacturing Mode
10G PHY
JSTBY1
LEDM1
JAOM
JF1
LE2
P1 DIMM
FAN2 FAN1