Table of Contents
Advertisement
M
EMORY
Before beginning the Memory Storage operation, select the desired frequncy while operat-
ing in the VFO mode by the "Main" band. Be sure to set up any desired CTCSS or DCS
tones, as well as any desired pereater offset. The power level may also be set at this time, if
you wish to store it.
2
Press and hold in the [ V/M ] key for two seconds to appear the "Memory Edit" window.
1
2
If you wish to append an Alpha/numeric "Tag" to this channel, press and hold the
[ V/M ] key again, then enter the desired name "Tag" (up to 8 character) by following
examples. Otherwise, skip to the next step.
Example 1: Press the one of the microphone's keypad. Press the [ A ] / [ B ] key to move
the cursor, and press the [ C ] key to delete all data after the cursor. You
may change the character (capital alphabet, small alphabet, numeric, and
symbol) by pressing the [ ] key.
Example 2: Rotate the left side [ DIAL ] knob to select character/number and press the
[
space the cursor. You may change the character (capital alphabet, small
alphabet, numeric, and symbol) by pressing the [ FONT ] key.
Press the the [ V/M ] key to store the frequency into memory.
3
On rare occasions the memorized data may become corrupted by miss operation,
or static electricity. When repairs are made the memory data may be lost. Please
write down or record the memorized information so you will be able to restore it if
needed.
6
O
PERATION
M
EMORY
1
2
2
3
] key to move the cursor to the next digit. Press the [ BS ] key to back-
Impotant Note
S
TORAGE
2
2
FTM-350R O
FCC ID: K6620335X40
IC: 511B-20335X40
M
PERATING
ANUAL
Advertisement
Table of Contents
