Childcare cosy time 036300-314 User Manual page 10

ASSEMBLY / OPERATING INSTRUCTIONS
To fix to bed in Sleeper mode (continued)...
3a.
3
3b.
4a.
4
5a.
5
CAUTION! Ensure the fixing belts are straight
7a.
6
7b.
7c.
10
Move the sleeper close to the parent's bed and check
the height of the sleeper compared with the mattress
on the bed.
The side support of the sleeper should always be
placed close to the parent's mattress and the mattress
should always be aligned with the height of the side
support for restraint of the sleeper.
In order to fix the Sleeper to the parent's bed in bed
side sleeper mode, use the attached pair of fixing belts
provided.
Slide the straps between the top mattress and the
base using a back and forth 'sawing' motion and at
the same time pulling downward until the straps and
anchor plates are in the desired position.
Tighten the loop by pulling the belts firmly.
Adjust the belts separately until the sleeper is firmly in
contact with the parent's mattress.
Store any excess of belts between the mattress and
the bed base.