Related Manuals for Childcare Qube High Chair 044290
Summary of Contents for Childcare Qube High Chair 044290
- Page 1 Qube High Chair Model # 044290 IMPORTANT: RETAIN FOR FUTURE REFERENCE, READ CAREFULLY...
-
Page 2: Safety Precautions
SAFETY PRECAUTIONS Read all instructions before assembly and use of the high chair. Keep instructions for future use. WARNING BEFORE ASSEMBLING THIS HIGH CHAIR, READ AND UNDERSTAND THE INSTRUCTIONS. Follow the manufacturer’s instructions Do not leave children unattended. The harness must always be used and correctly fitted - most injuries from high chairs are caused by falls. - Page 3 SAFETY PRECAUTIONS FALLING HAZARD: Prevent your child from climbing on the product. Be aware of the risk of tilting when your child can push its feet against a table or any other structure. Read all instructions before assembly and use of the stool mode. Keep instructions for future use.
- Page 4 CONGRATULATIONS Congratulations on your purchase of the Qube High Chair This product has been designed and developed with safety, comfort and functionality in mind. Please take the time to read this manual carefully before using this product and keep it in a safe place for future reference.
-
Page 5: Assembly Contents
ASSEMBLY CONTENTS Check what you have received... You have received 1 box. Please check the contents of the box against the list below. If anything is missing, please contact Customer Service. In Australia, contact CNP Brands on 1300 667 137, in New Zealand contact Wainhouse Distribution on 0800 567 5000. - Page 6 ASSEMBLY CONTENTS Supplied loose in box continued: Leg Stabilisers Footrest Bolts 18mm Leg Allen Key Bracing Bolts There are no accessories recommended for use with this Childcare Qube High Chair.
- Page 7 ASSEMBLY / OPERATING INSTRUCTIONS To assemble in High Chair Mode... Lay Seat down on the floor on its side. Insert 1 x Front Leg into the front leg housing on the underside of the Seat Base until it ‘clicks’ into position.
- Page 8 ASSEMBLY / OPERATING INSTRUCTIONS To assemble in High Chair Mode continued... Insert 1 x Front Feet onto the end of the Front Leg until it ‘clicks’ into position. Repeat for remaining Front Foot and Leg. Insert 1 x Rear Feet Assembly onto the ends of the Rear Legs until it ‘clicks’...
- Page 9 ASSEMBLY / OPERATING INSTRUCTIONS To adjust Tray... This Tray has 2 adjustable positions. To adjust Tray, pull tray adjustment latches on both sides of Tray and slide forward or backward to desired position. Release the tray adjustment latches, ensuring Tray ‘clicks’...
- Page 10 ASSEMBLY / OPERATING INSTRUCTIONS To remove Tray and Crotch Restraint Assembly continued... Angle the Tray Assembly upward until the Crotch Restraint sides match the shape of the Seat cut- outs. Push Crotch Restraint sides in towards the middle of the chair, until both sides disengage from the Seat.
- Page 11 ASSEMBLY / OPERATING INSTRUCTIONS To adjust the Footrest... NOTE: This High Chair has 4 Footrest adjustment positions. To move the Footrest to another position, first undo the Footrest Bolts and remove the Footrest from the High Chair. Remove the Footrest Bracket Bolts from the underside of the Footrest.
- Page 12 ASSEMBLY / OPERATING INSTRUCTIONS To use the Harness... CAUTION: The harness must be used at all times and be correctly adjusted. Most injuries from high chairs are caused by falls. Place baby in the seat. Attach shoulder straps to waist belt. Position the crotch strap between baby’s legs and feed arms through shoulder straps.
- Page 13 ASSEMBLY / OPERATING INSTRUCTIONS To remove Seat Pad continued... Remove the Seat Pad from the Seat. To assemble Seat Pad... Ensure the Velcro tabs connecting the two halves of the Seat Pad are aligned correctly. Place the Seat Pad onto the Seat. Feed the crotch strap up through the corresponding slot in the Seat Pad.
- Page 14 ASSEMBLY / OPERATING INSTRUCTIONS To remove Harness for cleaning... Remove the D-ring from the ends of the harness strap by sliding the webbing through the slot in the D-ring. Push strap end through the slot in the seat and remove harness. NOTE: There are 5 harness attachment points.
- Page 15 ASSEMBLY / OPERATING INSTRUCTIONS To convert to Stool Mode... Locate and remove the Seat Securing Bolt on the underside of the Seat Base. Locate and actuate the Seat Securing Button on the underside of the Seat Base. Whilst holding in the Seat Securing Button, slide the Seat forward and away from the Seat Base until the Seat Securing Button disengages.
- Page 16 ASSEMBLY / OPERATING INSTRUCTIONS To convert back to High Chair Mode... Remove the Seat Pad from the Stool Seat. Remove the Seat Securing Bolt from the underside of the Seat. Align Seat with the Seat Base, ensuring the guiding pins on the base of the Seat slot into the designated holes in the Seat Base.
-
Page 17: Maintenance
HOW TO CARE FOR YOUR CHILDCARE HIGH CHAIR Cleaning This product has been designed and developed with safety, comfort and functionality in mind. Please take the time to read this manual carefully before using this product and keep it in a safe place for future reference. - Page 18 These include distribution lines for Evenflo, Good Baby, Lascal, Maclaren, Project Nursery, Summer Infant and Yookidoo. Our own brands, including Childcare, have gone from strength to strength in recent years. Childcare, and our premium brand bebe care, demonstrate our commitment to quality and continuing...
- Page 19 NOTES...
- Page 20 Distributed in Australia by CNP Brands Distributed in New Zealand by Wainhouse 82 Maribyrnong Street, Footscray, VIC, 3011 Distribution Customer Service 1300 667 137 2-6 Argyle St, Morningside, PO Box 41-014, W: www.cnpbrands.com.au St Lukes, Auckland, New Zealand E: info@cnpbrands.com.au Customer Service: 0800 567 5000 F: www.facebook.com/CNPBrands I: @cnp_baby...