ASSEMBLY / OPERATING INSTRUCTIONS
To adjust height of Sleeper...
The sleeper can be adjusted to different height
1a.
1
positions.
To adjust the height, push the adjuster button then
1b.
turn the cap clockwise to lower the sleeper or anti
clockwise to raise the sleeper.
Turn the cap to the desired height.
1c.
2a.
Repeat this operation on the opposite side.
2
PLEASE ENSURE THAT BOTH LEGS OF THE BEDSIDE SLEEPER ARE ALWAYS ADJUSTED TO THE SAME
HEIGHT
To fix to bed in Sleeper mode...
Unzip the sides of the sleeper until they are completely
1a.
1
unzipped.
Push in the pop pin located on the top of the bar.
1b.
2a.
Slide the bar away from the pop pin.
2
2b.
The bar on both ends will slide out freely.
2c.
Roll the unzipped side down and secure with elastic
tabs.
9