Installation And Power Up; Attaching The Windshield Mount; Installing The Microsd Card - Uniden Witness DC1 Owner's Manual

No. Item
Reset
15
Speaker
16
Infrared
17
LED

INSTALLATION AND POWER UP

ATTACHING THE WINDSHIELD MOUNT

1. Insert the windshield mount bracket hook into the
bracket slot on the top of the DC1.
2. After inserting the hook, slide it down until it locks in
position.
3. Press the suction cup flat against the windshield.
4. Push the suction lock up until it snaps into place and
tighten the locking collar to secure.
5. Gently pull on the mount to make sure it is secure.

INSTALLING THE MICROSD CARD

A compatible microSD card (8GB supplied) is
required to record and store videos and photos.
The unit can support microSDHC cards (High Capacity
microSD) up to 32GB in capacity. Uniden recommends
using a good quality microSDHC card of at least 8GB
capacity and minimum Class 10 speed.
Insert a formatted microSD card gently in the slot on the
Description
If the device fails to operate, try
resetting the device. Press the
reset button using a pin or unfolded
paperclip.
LED for night vision
9