General Specifications; Troubleshooting - Creative Sound Blaster X-Fi Notebook User Manual

How to use this manual
1. Click the Mixer
2. Drag the Amount sliders up or down to increase or decrease the volume of each component.
Adjust performance settings
1. Click the Performance
2. Select the desired bit-depth from the drop down list.
3. Select the desired sampling rate from the drop down list.
Playback audio through onboard speakers
1. Click the Playback through Notebook Speakers
2. Select the Enable audio playback through Notebook Speakers check box.
Control wireless music settings
1. Click the Wireless Music Control
2. Select the Enable Wireless Music Control check box.
3. Select Broadcast or Zone
4. Select the Show Wireless Music Control status on startup check box.

General Specifications

Versatile Audio Features
Playback of up to 64 audio channels, each at an arbitrary sample rate
24-bit Analog-to-Digital conversion of analog inputs at 48 kHz sampling rate
16-bit Digital-to-Analog conversion of digital sources at 48 kHz to stereo output
16-bit Digital-to-Analog conversion of stereo digital sources at 48 kHz to stereo output
16-bit recording sampling rates: 8, 11.025, 16, 22.05, 24, 32, 44.1, and 48 kHz.
Notes
Depending on your system configuration, output sampling frequency may only be available at 48
kHz.
X-Fi CMSS-3D
X-Fi CMSS-3D Headphone: Provides a multichannel playback experience over headphones for all
types of content
X-Fi CMSS-3D Virtual: Provides a multichannel playback experience over two loudspeakers for all
types of content
Connectivity
Sound Blaster X-Fi Notebook
Audio Inputs
One 3.50 mm (1/8-inch) stereo jack for Analog Line In or Microphone In
Audio Outputs
One 3.50 mm (1/8-inch) stereo jack for Analog Line Out or Headphones
Interfaces
Wireless transmitter to connect with supported wireless devices.

Troubleshooting

file://C:\Users\Lee Fong\AppData\Local\Temp\~hhC3B1.htm
button.
button.
button.
button.
Page 17 of 19
17/4/2008