Planet WDRT-1202AC User Manual page 59

Object
Name
Source IP Address Range
Destination IP Address
Range
Protocol & Port Range
Schedule
Example
You can follow the configuration if you need only 192.168.1.150 to allow access.
Figure 5-3-4 Add IPv4 Rules
Description
Enter a name for the rule
Select "WAN" or "LAN" and enter the source IP address
Select "WAN" or "LAN" and enter the destination IP address
Select "TCP", "UDP" or" Any"
Select "Always Enable" or configure the schedule to activate the
rule
-53-
User Manual of WDRT-1202AC