Table of Contents
Advertisement
Wi-Fi Country/Region
Wi-Fi Channel
Transmission Power
Channel Width
HT20/40 Coexistence
Visibility Status
Schedule
5GHz
You may select the country close to you.
For an optimal wireless performance, you may select the least
interferential channel. It is advisable that you select an unu sed
channel or "Auto" to let device detect and select the best possible
channel for your wireless network to operate on from the
drop-down list.
Set the transmit power of router. The default is "High".
Select a proper channel bandwidth to enhance wireless
performance. When there are 11b/g and 11n wireless clients,
please select the 802.11n mode of 20/40MHz frequency band.
Default is disable
You may choose to visible or invisible SSID broadcast. When it is
enabled, the router SSID will be b roadcast in the wireless
network, so that it can be scanned by wireless clients and they
can join the wireless network with this SSID.
Select "Always Enable" or configure the schedule for some
devices to access.
Figure 5-2-17 5GHz Wi-Fi
-44-
User Manual of WDRT-1202AC
Advertisement
Table of Contents
