Table of Contents
Advertisement
Object
L2TP Server
Username
Password
Reconnect Mode
Maximum Idle Time
Address Mode
L2TP IP Address
L2TP Subnet Mask
L2TP Gateway IP Address
Primary DNS
Secondary DNS
MTU
Figure 5-2-6 L2TP
Description
Type the name of L2TP Server.
Enter the user name provided by your ISP.
Enter the password provided by your ISP.
Select "Always On", "On demand" or "Manual".
If you select "On demand", you can configure the time which is
auto disconnecting to ISP.
Select "Dynamic IP" or "Static IP"
Enter the IP Address.
Enter the subnet mask.
Enter the gateway address provided by your ISP.
Enter the necessary DNS address provided by your ISP.
Enter the other DNS address if your ISP provides you with 2 such
addresses, and it is optional.
You can keep the maximum transmission unit (MTU) as default.
-34-
User Manual of WDRT-1202AC
Advertisement
Table of Contents
