Names And Functions - Luxman C-900u Owner's Manual

Names and Functions

Front panel
1 2
1. Operation switch (OPERATION)
Turns this unit from the standby state to operation state.
When the main power switch on the rear panel is turned on
to set this unit to the standby state and this switch is turned
on, this unit is set to the operation state.
2. Operation indicator (OPERATION)
Blinks during warm-up when the operation switch is turned
on and lights up when the operation state is activated af-
terward.
3. Input selector (INPUT SELECTOR)
Selects the unbalanced input terminal or balanced input ter-
minal, both of which are located on the rear panel.
• Input transition by rotating clockwise:
→ →
LINE-1 LINE-2 LINE-3
→
BAL LINE-3 LINE-1...
• Input transition by rotating counterclockwise:
→ →
LINE-1 BAL LINE-3
→ →
LINE-3 LINE-2 LINE-1 ...
Factory default: LINE-1
The input/output muting circuit is activated to mute sound
during selecting an input.
4
3
12 11
→ → →
BAL LINE-1 BAL LINE-2
→ →
BAL LINE-2 BAL LINE-1
4
10 9 8
4. Display window
Displays the operation status of this unit.
This display window is composed of 8 indicators, input dis-
play, and volume display.
5. Volume control (VOLUME CONTROL)
Adjusts the sound volume.
Sound is not generated when this control is rotated coun-
terclockwise to the end, and then, the sound volume grad-
ually becomes higher when the control is rotated clockwise
→
as follows: mute -87 dB
1 dB.
5
7 6
→ → →
-86 dB .. 0 dB in steps of