JRC JMA-610 Instruction Manual page 51

2.3 NAMES AND FUNCTIONS OF ON-SCREEN CONTROLS
1
【RANGE】
A click on "+" will increment the RANGE SCALE.
A click on "-" will decrement the RANGE SCALE.
2 【AUTO TUNE】
A click on the box will select either Manual tune, "M" or Auto
tune, "A".
3
【TX/STBY】
A click on the box will select either TRANSMIT or STANDBY.
4 【PULSE LENGTH】
A click on the box will cycle through the available pulse lengths.
5
【OFF-CENTER】
A click on the box will cycle the center mode as follows.
CENTER1
6 【LENGTH OF TRAILS】
A click on the box will cycle the length of trails as follows.
Clicking and holding down the box over 2 seconds
will set the trails to OFF.
7 【MODE OF THE TRAILS】
A click on the box will select TRUE TRAILS,"T", or RELATIVE
TRAILS,"R".
8
【BRILLIANCE】
A click on the box will enable brilliance adjustment.
The brilliance can be change by [JOG DIAL] or [TRACK-BALL] and
[ENTER] key.
9 【INTERFERENCE REJECTION】
A click on the box will cycle IR mode as follows.
10 【DAY/NIGHT】
A click on the box will cycle the display mode as follows.
DAY1
NIGHT1
CENTER2 CENTER3
DAY2 DAY3
NIGHT2 NIGHT3
2-18
OFF
DAY4
NIGHT4
2