Remote Desktop - ABB COM600 series 5.0 Cyber Security Deployment Manualline

1MRS758267
3.2.5.
COM600 series 5.0
Cyber Security Deployment Guideline
To reconfigure Configuration Service from WebHMI:
• Click SetRemotingParameters shortcut on COM600 desktop. COM600 Remoting
Settings window opens.
• Select the new IP address of the LOCAL NIC and click Apply.
• Verify that the change reflects in Current IP and Port number.

Remote desktop

Windows remote desktop application in COM600 can be used to perform any maintenance
activities on COM600. These activities may involve managing for example any OS
related configuration, files/folder in hard drive, or network configuration. COM600 can
be made available for remote connection from peer Windows devices located outside
its physical perimeter by connecting it to a REMOTE LAN.
Before using Windows remote desktop application, the remote settings in COM600
should be enabled to allow remote desktop connections. This can be done using COM600
WebHMI. ABB recommends that remote desktop connections are enabled only when
needed.
To configure Remote desktop settings from WebHMI:
1. Login to COM600 WebHMI with a user account that has administrative privileges.
2. Select Communication tab.
3. Click Security Settings node in the tree displayed.
4. Select Remote desktop child node.
5. Select
a. Allow connections / Allow only secure connections option to enable remote
desktop connection to COM600.
b. Don't allow connections to COM600 computer option to disable remote
desktop connection to COM600.
6. Click Apply.
Figure 3.2.5-1 Enable Remote Desktop Connection
Enable_Remote_Desktop.png
23