Connecting Com600 To Wsus Server; Assign Com600 To Computer Group In Wsus Server - ABB COM600 series 5.0 Cyber Security Deployment Manualline

44
COM600 series 5.0
Cyber Security Deployment Guideline
Figure 5.8-1 Specify WSUS server in COM600

Connecting COM600 to WSUS Server

To connect to COM600 after changing group policy settings:
1. Open command prompt in administrator mode and execute command
.
/force
2. Initiate the Windows update agent in COM600 to connect to WSUS server by
executing the following commands from command prompt
•
wuauclt.exe /resetauthorization /detectnow
•
wuauclt.exe /reportnow

Assign COM600 to Computer Group in WSUS server

After executing the connection commands as explained in 5.9, Connecting COM600 to
WSUS Server, go back to WSUS server and locate the connected COM600 using Update
Services Console. For more information on how to open Update Services Console in
WSUS server, see 5.2, Add WSUS Server Role.
In the Update Services Console, go to Computers > All Computers > Unassigned
Computers. The computer name of COM600 from where the connection attempt was
initiated, should be listed as an unassigned computer.
Attempt to reassign the COM600 computer from unassigned computers group to the
COM600 Computer group created. See 5.4, Configuring WSUS for more information
on how to create COM600 Computer group in WSUS server. When updates are approved
1MRS758267
Specify_WSUS_server_in_COM600.png
gpupdate