Connecting The Headphones - Korg Pa1000 Quick Manual

turning the integrated speakers on and off
The integrated speakers are automatically deactivated when inserting a jack
into the PHONES
Turn the speakers off (or back on)
1 Go to the Global > Audio & Video > MP3/Speakers
2 Use the Speakers On/Off
3 Press the EXIT

Connecting the headphones

Connect a pair of headphones to the
phones with an impedance of 16-200 Ohms (50 Ohms suggested). When con-
necting the headphones, the integrated speakers are automatically deacti-
vated.
Adjust the output level with the
Connecting the audio outputs
Use the AUDIO OUT
powered monitors, or an audio amplification system. These are unbalanced
(TS) 6.35 mm, or 1/4", jack connectors.
When using a home audio amplifier, connect the other end of the cable to the
CD, LINE IN or TAPE/AUX input of your audio system. Don't use the PHONO
inputs of your audio system!
Turning the integrated speakers on and off |15
connector. They can also be deactivated from the display.
checkbox to turn the integrated speakers on or off.
button to return to the previous page.
MASTER VOLUME
connectors to send the audio output to a mixer, a set of
page.
PHONES connector. You can use head-
knob.