Connecting An External Display - Korg Pa1000 Quick Manual

134|

Connecting an external display

20 Connecting an external
display
You can connect Pa1000 to a TV or video monitor, to read lyrics and chords
with your fellow musicians or audience.
Connect the external video monitor
▪
Use the VIDEO OUT
tor.
Depending on the type of video monitor, you can use a cable of the RCA-to-
RCA type (if the monitor is equipped with a Video Composite input), or the
RCA-to-SCART type (if the monitor is equipped with a SCART connector).
You can buy the needed cables at a store that sells television equipment.
Go to the Video Out page
1 If it is off, turn the instrument on.
2 Go to the Global > Audio & Video > Video Out
Select the video standard
▪
Use the System
System
PAL
NTSC
connector to connect Pa1000 to a TV set or video moni-
menu to select the video standard.
Meaning
Used in most European, South American, Asian and African countries.
This setting can be also used with SECAM TV sets (used in France,
Russia, and some African countries); in this latter case, however, the pic-
ture is shown in black & white.
Used in North America, Central America and part of South America. It is
also used in Japan, Korea, Taiwan, Philippines and Myanmar.
page.