Replacing Propeller Fan Blade Assembly - Daikin 2MXM50M Service Manual

ESIE16-02B | Part 3. Repair

3.3.2.10. Replacing propeller fan blade assembly

PRELIMINARY ACTIONS
1. Switch off the Daikin unit via the user interface.
2. Switch off the Daikin unit with the field supplied circuit breaker.
3. Remove the propeller fan blade assembly, refer to
PROCEDURE
Removal
1. Remove the insulation (1) from the switch box.
2. Unplug the fan motor connector (3) from the main PCB.
W : R
ARNING
When reconnecting a connector to the PCB, do not apply force, as this may damage the connector or connector pins of
the PCB.
3. Release the fan motor assembly harness (2) from the slot (4).
4. Slightly bend the harness retainers (5) to release the fan motor assembly harness (2).
5. Loosen and remove the screws (6) that fix the DC fan motor assembly (7).
6. Remove the DC fan motor assembly (7).
4/04/17 | Version 1.1
RA R32 Split & multi split M-Series
"Replacing propeller fan blade assembly" on page
F
ISK OF IRE
3.3. Unit specific repair procedures
149.
Page 85