Programming; Using Programming Bar Codes; Configure Other Settings; Resetting Standard Product Defaults - Datalogic RIDA DBT6400 Quick Reference Manual

Programming

Programming
The reader is factory-configured with a set of standard
default features. You can select other options and cus-
tomize your reader through use of the programming bar
codes available in the Product Reference Guide (PRG) or
Datalogic Aladdin™ configuration software (both available
on the Datalogic website).

Using Programming Bar Codes

This manual contains bar codes which allow you to recon-
figure your reader. Some programming bar code labels
require only the scan of that single label to enact the
change.
Other bar codes require the reader to be placed in Pro-
gramming Mode prior to scanning them. Scan an ENTER/
EXIT bar code once to enter Programming Mode; scan the
desired parameter settings; scan the ENTER/EXIT bar
code again to accept your changes, which exits Program-
ming Mode and returns the reader to normal operation.

Configure Other Settings

Additional programming bar codes are available to allow
for customizing programming features, if your installation
requires different programming than the standard factory
default settings. Refer to the PRG or to the Datalogic
Aladdin™ configuration software.

Resetting Standard Product Defaults

Refer to the PRG for a listing of standard factory settings.
If you aren't sure what programming options are in your
reader, or you've changed some options and want the fac-
tory settings restored, scan the bar code below to copy the
factory configuration for the currently active interface to
the current configuration.
Standard Product Default Settings
Quick Reference Guide 15