Table of Contents
Advertisement
Programming
Programming
The reader is factory-configured with a set of standard default features.
After scanning the interface bar code from the Interfaces section, select
other options and customize your reader through use of the program-
ming bar codes available in the Heron HD34XX PRG. Check the corre-
sponding features section for your interface, and also the Data Editing
and Symbologies chapters of the PRG.
Using Programming Bar Codes
This manual contains bar codes which allow you to reconfigure your
reader. Some programming bar code labels, like the
tings" on page 16
change.
Other bar codes require the reader to be placed in Programming Mode
prior to scanning them. Scan an ENTER/EXIT bar code once to enter Pro-
gramming Mode; scan the desired parameter settings; scan the ENTER/
EXIT bar code again to accept your changes, which exits Programming
Mode and returns the reader to normal operation.
Configure Other Settings
Additional programming bar codes are available in the PRG to allow for
customizing programming features. If your installation requires different
programming than the standard factory default settings, refer to the
PRG.
Resetting Product Defaults
If you aren't sure what programming options are in your reader, or you've
changed some options and want your custom factory settings restored,
scan the bar code below to reset the reader to its initial configuration.
Reference the PRG for other options, and a listing of standard factory set-
tings.
Factory defaults are based on the interface type. Be sure
your reader is configured for the correct interface before
scanning this label. See "Selecting the Interface Type" on
page 7 for more information.
NOTE
16
, require only the scan of that single label to enact the
Reset Default Settings
"Reset Default Set-
Heron™ HD3430
Hide quick links:
Advertisement
Table of Contents
