Advanced Reader Configuration; Host Mode Programming - Datalogic Matrix 400 Quick Reference Manual

Compact imager

Hide thumbs Also See for Matrix 400:

Table of Contents

MATRIX 400™ QUICK GUIDE

ADVANCED READER CONFIGURATION

For further details on advanced product configuration, refer to the complete Reference Manual on the installation

CD-ROM or downloadable from the web site through this link: www.automation.datalogic.com/matrix400.

The following are alternative or advanced reader configuration methods:

ADVANCED CONFIGURATION USING VISISET™

Advanced configuration can be performed through the VisiSet™ program by selecting Device> Get Configuration

From Temporary Memory to open the Parameter Setup window in off-line mode. Advanced configuration is

addressed to expert users being able to complete a detailed reader configuration. The desired parameters can be

defined in the various folders of the Parameter Setup window and then sent to the reader memory (either

Temporary or Permanent):

Figure 17 - VisiSet™ Parameter Setup Window

The reader can also be configured from a host computer using the Host Mode programming procedure, by

commands via the serial interface. See the Host Mode Programming file on the CD-ROM.

ALTERNATIVE LAYOUTS

If you need to install an Ethernet network, Pass-Through network, Multiplexer network or an RS232 Master/Slave

refer to the Matrix 400™ Reference Manual.

Table of Contents