Visual Inspection Of The Machine; Adding Fuel; Check - Air Filter; Overturning Machine - NTC RZ113 Operation Manual

Asphalt and concrete cutters

3.2. Visual Inspection of the Machine

Check regularly the machine for:
 missing parts
 released bolts and screws
 oil or fuel leakage

3.3. Adding Fuel

1. Gasoline engines:
Use unleaded or leaded gasoline for motor
vehicles, with octane number 91 or more.
Top up fuel as necessary.

3.4. Check - Air Filter

Check the air filter for cleanness on a daily
basis. Clean or replace the filter if dirty.
Never run the machine with air filter missing or
damaged. Dust and dirt which get into the
engine would cause rapid wear.
3.5 Tipping machine
Tipping machine when the machine tipped over may break of oil into the carburetor, or the plunger.
Therefore, we recommend to inform the authorized service center, or the manufacturer about how to
proceed.
Page 13
 free motion of the cutting disc spindle
Pay special attention to safety devices (covers)
and controls.
Never use dirty fuel or mixture with oil.
Avoid water and dust from entering the fuel
tank.
Fig. Air filter - HONDA
Operation manual
issued 01/2017