Hitachi 3700 Installation Instructions Manual page 13

•
•
•
Note
7
Press
<Enter>
to accept the default valu e 300 UNLESS you have an
early M300 1/0 Board that has no DIP switches, and you have
changed the CD controller board
to
200H. If you have done so, en-
ter 200 and press
<Enter>
to change the address here.
The program asks :
Which directory would you like the CD ROM device driver files in -
stalled in?
(Press RETURN for default)
C:\DEV [Default]
C:\
8
Type c: \ to install the device driver files in the root directory of
your hard-disk drive.
The program responds:
Installing file HITACHIA.SYS
Copying file HITACHIA.SYS to c:\HITACHIA.SYS .... .... .. Done
OCLC recommends that you install the MS-DOS Extensions soft-
ware in the root directory to avoid having to edit pathnames in
your CONFIG.SYS and AUTOEXEC.BAT files later.
The program asks:
Which directory would you like MSCDEX.EXE installed in?
(Press RETURN for default)
C:\BIN [default]
C:\
9
Type
c: \
to install the MSCDEX.EXE file in the root directory of
your hard-disk drive .
The program responds:
Installing file MSCDEX.EXE
Copying file MSCDEX.EXE to c:\MSCDEX.EXE .. ..... .. Done
The program asks:
Would you like to continue the setup procedure? [Y or N].
10
If you are using OCLC DiscLit"', press
<Y>
for "yes " to update the
existing AUTOEXEC.BAT and CONFIG.SYS files with current pa-
rameters (including the number of CD drives attached). The pro-
gram then displays the message that setup is complete.
If you are using other OCLC CD products (such as CAT CD450®
software),
press <N> for "no ." The OCLC CD software automat-
ically updates your AUTOEXEC.BAT and CONFIG.SYS files and in-
stalls the CD-ROM Extensions software . You may now install the
CAT CD450 software.
If you are using non-OCLC software products , consult your system
documentation for recommended actions . If you press
<Y>
for
"yes ," the system updates the existing AUTOEXEC.BAT and
CONFIG.SYS files with current parameters (including the number
of CD drives attached). The program then displays the message
that setup is complete .
Hitachi 3700 CD Drive Installation Instructions 13