Download  Print this page

Product Overview; Features; Access Control System Compatibility - GE 240 Installation Manual

Contactless smart card reader
Hide thumbs


Product Overview


Universal compatibility with all ISO 15963 and ISO 14443A
credentials (badges, disc tags, and key fobs).
Supervised four-state (open, closed, wire cut, and wire short)
monitoring for door contacts, REX (request to exit).
Electrical protection (reverse polarity diode protection on power
Data lines; high-speed transient voltage suppressor diodes
Compatible with Micro/5 2RP and 8RP Reader Processor boards,
Micro/PX-2000, and Micro/PXN-2000 controllers
IP 65-rated sealed electronics for deployment in both interior and
exterior environments.
Integrated reader tamper protection and supervised data
Reads the serial BID (badge ID) number of all ISO 15693 and ISO
14443A credentials.
12-button tactile membrane keypad (3 x 4 matrix) for PIN (personal
identification number) entry (Model 245 only).
RS-485 communications for reader firmware maintenance operations.

Access Control System Compatibility

The Model 24x badge reader outputs a 16-digit badge identification (BID)
number. As a result, the Model 24x Smart Card Readers are compatible
with Picture Perfect while microcontrollers on a Secure Perfect system
must be field-configured for Model 24x compatibility.
Picture Perfect Edition Setup
Refer to Access/Badge Formats or to the Picture Perfect online help for
assistance. A 16-digit BID format must be defined within Picture Perfect.
Enter a suitable badge format description. Example:
and define the format:
Secure Perfect Edition Setup
The Secure Perfect Edition access control system supports Badge IDs
(BIDs) up to a maximum of 12-digits. Since the Model 24x readers output
a 16-digit BID number, the Secure Perfect host controller/
GE Contactless Smart Card Reader Model 24x
16-digit BID


Table of Contents

  Related Manuals for GE 240

  Related Content for GE 240

This manual is also suitable for: