Table of Contents
Advertisement
2
KTR-11 Face/Badge Reader
Installation Manual
Product overview
GE Security's KTR-11 face/badge reader is used to control access to a facility. A single keypad controller can
control up to 512 KTR-11 units. In general, the KTR-11 operates in the following sequence:
1. A person requesting access at the KTR-11 site places his/her identification in the badge box and
presses the call button. The keypad controller receives the call and displays its site number.
2. When the operator at the control location selects the site, (1) two-way audio communication and
control of the entry point are established; and (2) the face of the caller appears on the monitor screen.
3. The operator may then send commands to the KTR-11 to select face and face/badge camera views,
raise or lower the face camera's mirror, open the door, gate, or turnstile, etc.
The above sequence describes the face/badge reader's operation in a standalone setting. However, one or more
KTR-11s can also be used as receiver sites in GE Security's Digiplex system. All units would be linked to a
GE Security KTD-304A keypad, which also controls pan/tilt/zoom functions for other Digiplex components.
Advertisement
Table of Contents
