Scv3000 And Scv3020 Storage System Technical Specifications; Technical Specifications - Dell SCv3000 Owner's Manual

SCv3000 and SCv3020 Storage System Technical
Specifications
This appendix contains the technical specifications for the SCv3000 and SCv3020 storage system.

Technical Specifications

The technical specifications of the SCv3000 and SCv3020 storage systems are displayed in the following tables.
Drives
SAS hard drives
Storage Controllers
Storage controllers
Storage Connectivity
Configurations
Redundant Array of Independent Disks (RAID)
Controller
Management
Back-Panel Ports Connectors (per Storage Controller)
Fibre Channel, iSCSI, or SAS front-end
connectors
Ethernet connectors
SAS back-end connectors
Serial connector (micro USB)
20

SCv3000 and SCv3020 Storage System Technical Specifications

SCv3000 Up to 16 3.5-in. hot-swappable hard drives (12 Gb SAS)
SCv3020 Up to 30 2.5-in. SAS hot-swappable hard drives (12 Gb SAS)
Up to two hot-swappable storage controllers with one I/O card slot and one
optional mezzanine card per storage controller.
Each storage controller has an internal battery backup unit. Write cache is
mirrored between the two storage controllers. If a power failure occurs, the
battery backup unit provides power to the storage controller so that the write
cache can be saved to an SSD within the storage controller.
SCv3000 Supports a total of 150 drives and up to 120 drives on a single SAS
chain.
SCv3020 Supports a total of 150 drives and up to 134 drives on a single SAS
chain.
Two hot-swappable storage controllers
RAID management using the Dell Storage Manager
Connection to a Fiber Channel fabric, iSCSI network, or a direct connection to
servers with SAS HBAs
MGMT – 1 Gbps embedded Ethernet port used for Storage Center management
12 Gb SAS ports for connections to expansion enclosures
NOTE: SAS connectors are SFF-8644 compliant.
Used for initial configuration and support-only functions
3