Dell SCv3000 Owner's Manual page 19

Figure 13. Removing a Power Supply/Cooling Fan Module
1. Power supply/cooling fan module
3. Release tab
5. Power switch
4. Slide the replacement power supply/cooling fan module into the chassis until it is fully seated and the release tab clicks into
place.
5. Connect the power cable to the power supply/cooling fan module and make sure the cable is plugged into a power outlet.
6. Secure the power cable using the hook-and-loop strap.
7. Press the power switch on the power supply/cooling fan module to turn it on.
NOTE: Allow several seconds for the storage system to recognize the power supply/cooling fan module and
determine its status. When the power supply/cooling fan module is functioning properly, the AC power status
indicator turns green and the power supply/cooling fan status indicator is off.
8. In Dell Storage Manager, make sure that the replacement power supply is recognized and shows as up and running.
Next step
1. Use Dell Storage Manager to edit the Storage Center settings and set the operation mode of the Storage Center to Normal
mode.
2. Use Dell Storage Manager to send SupportAssist information to Dell Technical Support.
2. Power socket
4. Power supply/cooling fan module LED handle
Replacing SCv3000 and SCv3020 Storage System Components
19