Range Button - Test Equipment Depot 9305 Instruction Manual

RANGE BUTTON

When the meter is first turned on, it automatically goes into
AutoRanging. This automatically selects the best range for the
measurements being made and is generally the best mode for
most measurements. For measurement situations requiring
that a range be manually selected, perform the following:
1. Press the RANGE button. The "Auto Range" display
indicator will turn off, The "Manual Range" display indicator
will turn on
2. Press the RANGE button to step through the available
ranges until you select the range you want.
3. Press and hold the RANGE button for 2 seconds to
exit the ManualRanging mode and return to AutoRanging.
Battery Replacement
1. Remove the 2 rear Phillips head screw
2. Open the battery compartment
3. Replace the 2 "AAA' batteries (1.5V, UM4, R03)
4. Re-assemble the meter
11