Playard Assembly And Use - Delta LX PLAYARD Assembly Instructions Manual

1
• Unfasten the straps on the mattress pad.
• Remove the bassinet, toy bar, and the playard from inside the
mattress pad.
2
• Carefully pull the end rails out.
IMPORTANT! Do not push down on the center hub.
you will do this in step 4.
Customer Service
Tel. (800) 377-3777

Playard Assembly and Use

• Make sure the center hub is raised at least 18 inches.
• Grasp the center of each side rail and end rail then lift to "SNAP"
• If "snapping" of the side rail and end rail locks does not occur
IMPORTANT! Before pushing down the center hub into a locked
position, check that the support legs are positioned flat on the
floor to successfully lock down the center hub.
• Press down on the center hub to lock it into the use position.
5
3
Minimum Distance: 18 inches from the floor
into the locked position.
easily, recheck that the center hub is up to recommended height
before proceeding.
Support Legs
4
www.DeltaChildrensProducts.com