Opening the pan bar
Open the black clamping lever (14) of the pan bar and move the pan bar into the desired position.
Apply the clamping lever of the pan bar. During transportation the pan bar can be moved next to
the tripod legs.
WARNING!
Open the clamping lever of the pan bar far enough. The teeth of the pan bar
clamp should not clatter while moving the pan bar. However, a plastic protector,
clamping washer (15) prevents against wear of metal toothed ring. Make sure that
the teeth interleave with each other when closing the clamping lever of the pan bar.
Fig 4
(14)
(16)
Installing the pan bar on a head
Tighten the clamping lever (Clockwise)
(13)
(15)
7