Operation
Installing the head on a tripod
The Ares 3 fluid head is supplied with an integral 100mm ball mount, designed for installation
on a compatible Secnovo tripod.
To install the head, remove the bowl clamp (4) from the head (turn bowl clamp anti-clockwise
as in Figure 3), position the head on the tripod and refit the bowl clamp from below. Level the
head with aid of level bubble (11) and apply the bowl clamp (turn bowl clamp clockwise as
in Figure 3).
Fig 3
Ares 3 head (SC-Video 10/100VP)
Ares 3 tripod (SC-EN/CF 100M)
(4)
Loosen the bowl clamp (Anti-clockwise)
Tighten the bowl clamp (Clockwise)
Installing the head on a tripod
6