Aiphone GT-DMB-N Operation Manual page 35

GUARD STATION
C Searching for a unit by using the search item
list
Searching for a building in the list + entering
unit #
1
Press ( ).
The search item list is displayed.
2
Select "BUILDING" by pressing
BUILDING
ZOOM
ADJUS
WIDE
3
Press ( ) or
The building list is displayed.
4
Follow steps 2 to 6 of
ZOOM ZOOM ZOOM
or
WIDE WIDE WIDE
BUILDING
GUARD STATION
ENTRANCE
ZOOM ZOOM
.
WIDE WIDE
3
B-
.
Entering a building # + unit #
1
Press (
The search item list is displayed.
2
Select "BUILDING" by pressing
ZOOM
ADJUS
WIDE
.
3
Press (
"BUILDING #" screen is displayed.
4
Follow steps 2 to 6 of
NOTES:
• Communication will end automatically after approximately 3
minutes. Communication with a residential/tenant station in
hands-free mode ends automatically after 1 minute in hands-free
mode.
• If both unit # 111 and 1111 exist, the resident name for unit 111
will be displayed when 1, 1, 1 is entered, and the resident name
for unit 1111 will be displayed if 1 is entered one more time.
• Stations can be set to display in order by unit #. (The order starts
with the lowest digit from 0 to 9 and then the order goes by
letter.) In cases where unit # such as A101, A201, A901, A1001,
and B101 exist, the order starts with the lowest digit and goes in
the order A101, A201, A901, B101, A1001.
- 35 -
).
ZOOM
or
WIDE
BUILDING
BUILDING
GUARD STATION
ENTRANCE
ZOOM ZOOM
) or .
WIDE WIDE
4
B-
.
ZOOM ZOOM
.
WIDE WIDE