Aiphone GT-DMB-N Operation Manual page 13

ENTRANCE STATION
A
Confi rming the target unit in the quick list
Unit # and resident names frequently called are preset to be
displayed in the quick list.
*
Up to 4 units can be displayed.
Unit #
Resident name
1
In standby mode, press
target unit, or 10-key to change the standby
screen.
or
The "UNIT LIST" screen B
displayed.
2
Follow the operating procedure of either
depending on the displayed screen.
is available in a tenant building/section only.
*
C
B
Searching for a unit in the unit list
1
In standby mode, press
display the target unit # and resident name.
or
The 10-key can be used to enter unit #, or by pressing
the 10-key can be used to enter letters (resident name).
*
Depending on the settings, only the resident name may be
displayed.
*
The list is displayed in order of either unit # or resident name.
*
If you have entered a wrong number, press
standby mode.
2
When the target unit is displayed, press
The target unit is called.
*
Refer to "When the target unit is successfully called"
at the end of 2-1 for details.
INFORMATION
101 SMITH
102 AIPHONE
103 DENTIST
201 LAINE
NUMBER ALPHA
and to display the
or "ENTER UNIT #" screen C
or
B
HOW TO CALL
1. SELECT UNIT
2. CALL
ALPHA
NUMBER
and or 10-key to
UNIT LIST
101
SMITH
CALL CANCEL
, then
to return to
.
C
Entering unit #
Entering unit # can only be performed on this screen.
NOTE:
Entering resident name is not possible.
When the target unit number is numerals
only
1
In standby mode, enter numbers using [0] to [9]
on the 10-key to display the target unit #.
*
The 10-key can be used even after pressing
*
Depending on the system, only the resident name may be
displayed.
is
*
If you have entered a wrong number, press
standby mode.
2
When the target unit # is displayed, press
C
The target unit is called.
*
Refer to "When the target unit is successfully called"
at the end of 2-1 for details.
When the target unit number is alphanumeric
1
In standby mode, press
*
The 10-key can be used even after pressing
2
Enter letters using the 10-key to display the
target unit #.
*
Refer to the next page for how to enter letters.
3
When the target unit # is displayed, press
The target unit is called.
*
Refer to "When the target unit is successfully called"
at the end of 2-1 for details.
- 13 -
HOW TO CALL
1. ENTER UNIT #
2. CALL
or .
ENTER UNIT #
UNIT #
ALPHA
CALL CANCEL
to return to
.
on the 10-key.
or .
ENTER UNIT #
UNIT #
NUMBER
ALPHA
CALL CANCEL
.