Digitron EX-9486-W Operation Manual page 43

.
(Figure 4.3)
After "OK" button is pressed, Figure 4.4 appears. Enter the converter's IP address
(e.g. 192.168.0.10) at the "Host address:" field, and the Socket port number set for
the Serial Port 1 at the "Port number:" field (e.g 4660). (The Socket type of the
Serial Port 1 should be "TCP Server".)
(Figure 4.4)
After "OK" button is pressed, Figure 4.5 appears. If the Hyper Terminal connects
with the converter successfully, the time clock at the "left lower" corner "Connected
hh:mm:ss" will start counting.
42