Table of Contents
Advertisement
Right Side
DC-In Power Outlet
The
EX-9486-W
is powered by a single 9∼12V DC(Inner positive/outer
negative) power supply and 500~1200mA of current. A suitable power
supply adapter is part of the packaging. Connect the power line to the power
outlet at the right side of
EX-9486-W
and put the adapter into the socket. If
the power is properly supplied, the "SYS" green color LED will be on
Ethernet Port
USB Port
Antenna
DC-In
Power Outlet
USB Port
The
EX-9486-W
of USB port is.
Antenna Connector
The connector for antenna is a standard SMA jack. Simply connect it to a
2.0dBi or 5.0dBi dipole antenna (Standard Rubber Duck) and it is 50 Ohms
impedance and can support 2.4GHz frequency.
Ethernet Port
The connector for network is the usual RJ45. Simply connect it to your
network switch or Hub. When the connection is made, the LAN LED
indicator will light. When data traffic occurs on the network, red (Rx/Tx)
indicator will blink during data transferring and receiving.
12
Advertisement
Table of Contents
